JC Utility Sales, Inc.
PVC Pipe, Manhole Inserts, RACI Spacers,
PVC Fittings, Cherne Products
Representing the Manufacturer - - Professionally
Products:
Place an Order
We will walk you through determining the specifications of your order.
214-340-7866
Local Dallas Number
1.800.966.5147
Toll Free Number
Manhole Inserts
Advantages:
- Eliminates water run-off from sewer collection systems.
- Keeps dirt and debris out of sewer collection.
- Controls sewer odors.
- Also excellent for electrical and telecommunication manholes.
- Manufactured of high density, high molecular weight polyethylene, which eliminates brittleness, splitting by cold temperatures or road impact.
- Ventilation by valve or vent hole.
- No corrosive parts.
Fax your order to 214.343.7105
J.C. Utility Sales, Inc.
10920 Switzer Avenue, Suite 108
Dallas, TX 75238
MANHOLE INSERT SPECIFICATION:
The manhole insert shall be manufactured from corrosion resistant material suitable for atmospheres containing hydrogen sulfide and diluted sulfuric acid and other gases associated with waste water collection systems.
The body of the insert shall be made of high density, high molecular weight polyethylene copolymer meeting ASTM specification designation D1248 Class A, Category 5, Type 111. The insert shall have a minimum 1/8 inch or greater throughout.
The gasket (when required) shall be made of closed cell neoprene. The gasket shall be installed by the manufacturer and shall have a pressure sensitive adhesive on one side.
A lift strap shall be placed on the rising edge of the inset bowl and shall be one inch wide polypropylene web. The location of the strap shall be attached by means of a stainless steel rivet and be located such as to provide easy visual location.
Ventilation of the insert shall be made by valve or vent hole. The vent hole located on the side wall of the dish ¾ inch below the lip is preferred as its ventilation is not affected by debris that might collect in the bottom of the insert.
Ventilation of the insert shall be made by valve or vent hole. The vent hole located on the side wall of the dish ¾ inch below the lip is preferred as its ventilation is not affected by debris that might collect in the bottom of the insert.
The insert shall have proof of durability in traffic impact loads, and shall have engineer certified proof of test passing a collapse load of 2200 pounds minimum applied to a 5 ½ inch square area in the center of the insert. The insert shall be as marketed by J.C. Utility Sales Inc., Dallas, Texas 800-966-5147 or 214-340-7866, or approved equal.
Download these Manhole Ordering Specifications.pdf
